Commands - CTC SMS V4 Instructions D'installation Et D'entretien

English
1.5

Commands

Commands are sent to CTC SMS via an SMS message from your mobile
phone.
Command to CTC SMS
activatenumber
cancelnumber
alarmreset
room1:XX
Example:
room1:22
room2:XX
operationdata
EN
alarms
36
CTC SMS
Message from CTC SMS
CTC SMS activated
CTC SMS deactivated
Alarm [type]
Alarm reset / Cannot reset alarm
Power cut / Power back
Room 1 temperature set to: XX
Room 2 temperature set to: XX
Temperatures:
Outdoor XX
Room 1 XX Target XX
Room 2 XX Target XX
Alarms:
[Number of alarms or "None"]
List of current alarms or "0 active
alarms"
!
Only lower-case let-
ters in commands
to CTC SMS, and no
spaces
Function
Activates the SMS function for
commands and messages to/
from your mobile phone number.
Deactivates the mobile phone
Heat pump/boiler sends
automatic SMS in the event of
an alarm.
Heat pump/boiler sends
automatic SMS in the event of a
power cut.
Enter target value for room
temperature in radiator system 1.
In order for this command to
change the target value for the
room temperature, room sensors
must be connected. If not, the
command will have no effect.
Enter target value for room
temperature in radiator system 2.
List of all active alarms.