CTC SMS V4 Instructions D'installation Et D'entretien page 35

English
Deactivating the mobile phone.
If you send the command "cancelnumber" from an activated mobile phone,
it will be disconnected. CTC SMS will respond with an SMS message: "CTC
SMS control deactivated".
Heat pump alarm
In the event of an alarm from the heat pump, SMS messages will be sent
to the activated numbers. The alarm can be reset with the "alarmreset"
command. CTC SMS will indicate whether or not the alarm reset has
succeeded with "Alarm reset" or "Cannot reset alarm".
If the same alarm recurs, it will generally be sent every 24 hours.
Power cut alarm
In the event of a power cut, CTC SMS will send a "Power cut" alarm.
When the power comes back, the controller will send "Power back".
Changing the room temperature, radiator system 1
The room temperature can be changed with the command "room1:XX".
To change the room temperature for radiator system 1 to 22 °C, for example,
this text will be sent:
room1:22
NB: No space between ":" and the temperature, and lower-case letters.
CTC SMS will reply with a text saying "Room 1 temperature set to: 22".
Changing the room temperature, radiator system 2
The room temperature can be changed with the command "room2:XX".
To change the room temperature for radiator system 2 to 20 °C, this text will
EN
be sent:
room2:20
NB: No space between ":" and the temperature, and lower-case letters.
CTC SMS will reply with a text saying "Room 2 temperature set to: 20".
Operation data.
To retrieve the latest operational data from CTC SMS, the command
"operationdata" is used. CTC SMS will respond with an SMS message:
"Temperatures:
Outdoor XX
Room 1 XX Target XX
Room 2 XX Target XX
Alarms:
Number of alarms or "None".
To list any alarms, the command "alarms" is used. CTC SMS will respond
with all active alarms.
35
CTC SMS