Dell OptiPlex 320 Guide Rapide page 35

Masquer les pouces Voir aussi pour OptiPlex 320:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Light Pattern
Problem Description
Memory modules are detected, but a
memory failure has occurred.
A possible graphics card failure has
occurred.
A possible floppy or hard drive failure has
occurred.
A possible USB failure has occurred.
Suggested Resolution
• If you have one memory module installed,
reinstall it and restart the computer. For
information on reinstalling memory
modules, see your online User's Guide.
• If you have two or more memory modules
installed, remove the modules, reinstall one
module, and then restart the computer. If
the computer starts normally, reinstall an
additional module. Continue until you have
identified a faulty module or reinstalled all
modules without error.
• If available, install properly working
memory of the same type into your
computer.
• If the problem persists, contact Dell. For
information on contacting Dell, see your
online User's Guide.
• If the computer has a graphics card, remove
the card, reinstall it, and then restart the
computer.
• If the problem still exists, install a graphics
card that you know works and restart the
computer.
• If the problem persists or the computer has
integrated graphics, contact Dell. For
information on contacting Dell, see your
online User's Guide.
Reseat all power and data cables and restart
the computer.
Reinstall all USB devices, check cable
connections, and then restart the computer.
Quick Reference Guide
35

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

DcsmDcne

Table des Matières