Technical; Implementation Standards - Master Pumps MPXI11MULTI4PC17 Guide D'utilisation

3.

TECHNICAL

MPXI11MULTI4PC17
Mains voltage / frequency
Absorbed power
-1
Speed min
Type of protection / Insulation class
Suction fitting
Delivery fitting
Maximum flow rate
Maximum head
Maximum suction height including load losses
Power cable
Weight
Maximum dimension of pumped solid particles
Maximum admitted working pressure
Minimum ambient temperature
Maximum ambient temperature
Maximum temperature of the pumped fluid
Maximum number of starts per hour, uniformly distributed 40
Noise emission values measured according to relevant standard.
Acoustic pressure level
L 65 dB(A)
PA
Acoustic power level
L 85 dB(A)
WA
Weighted root mean square acceleration according to relevant standard. : < 2.5 m/s²
The declared vibration total value has been measured in accordance with a standard
test method and may be used for comparing one tool with another that the declared vibration
total value may also be used in a preliminary assessment of exposure.
A warning that the vibration emission during actual use of the power tool can differ
from the declared total value depending on the ways in which the tool is used and of the need
to identify safety measures to protect the operator that are based on an estimation of exposure
in the actual conditions of use (taking account of all parts of the operating cycle such as the
times when the tool is switched off and when it is running idle in addition to the trigger time).

4. IMPLEMENTATION STANDARDS

• IEC/EN 60335-1
Part 1: General requirements.
• IEC/EN 60335-2-41 Household and similar electrical appliances - - safety
Part 2-41: Particular requirements for pump
K = 3 dB(A)
K = 3 dB(A)
The sound power pressure
may exceed 85 dB(A), in this
protection must be worn.
Household and similar electrical appliances - - safety
220V-240V~50
1100 Watt
2850
F / IP X4
1"
1"
5400 l/h
45 m
8 m
H07 RNF
12.8Kg
1mm
4.5 bar
5° C
35° C
40° C
ATTENTION !
case individual hearing