Prohibited Use Of This Power Tool; Electrical Safety; Safety Precautions; Outdoor Use - Evolution EVOMAG 28 Manuel D'utilisation

WARNING: To prevent ingress of fluids into
the electrical system, cutting paste should be
used rather than cutting fluid when using a
machine in an inverted position.
(9.14)
PROHIBITED USES OF
THESE POWER TOOLS
• These power tools must always be provided
with a ground or protective earth connection
and use AC supply only.
• These power tools should not be used in a
potentially explosive environment.
• These power tools should not be used in a
wet or humid environment where water could
be drawn into the machine's cooling and
ventilation system.
• These machines should never be positioned
on a work piece between the electrode and
ground of an arc type welder. Damage will
result as the welder will ground through the
magnetic drill's ground or earth cable.
• These machines should not be used where
the voltage is abnormally lower than the rated
voltage, subject to voltage tolerances. Check
the machine's rating plate and the available
mains voltage supply to ensure compatibility.
WARNING: Operating these machines
on a lower than rated voltage may result
in the electromagnet being at a reduced
power level, and the machine could become
unstable whilst cutting.
(1.13)
WARNING: This machine is not intended for use
by persons (including children) with reduced
physical, sensory or mental capabilities, or lack
of experience and knowledge, unless they
have been given supervision or instruction
concerning the safe use of the machine by a
person responsible for their safety and who is
competent in its safe use.
Children should be supervised to ensure
that they do not have access to, and are not
allowed to play with, this machine.
www.evolutionpowertools.com
(1.14)

ELECTRICAL SAFETY

This machine is fitted with the correct moulded
plug and mains lead for the designated market.
If the mains lead or the plug are damaged in
any way, they must be replaced with original
replacement parts by a competent technician.
(1.15)

OUTDOOR USE

WARNING: For your protection, if this tool is
to be used outdoors it should not be exposed
to rain, or used in damp locations. Do not place
the tool on damp surfaces. Use a clean, dry
workbench if available. For added protection
use a residual current device (R.C.D.) That will
interrupt the supply if the leakage current
to earth exceeds 30mA for 30ms. Always
check the operation of the residual current
device (R.C.D.) before using the machine. If an
extension cable is required it must be a suitable
type for use outdoors and so labelled.
The manufacturer's instructions should be
followed when using an extension cable.
(2.1)
GENERAL POWER TOOL
SAFETY INSTRUCTIONS
(These General Power Tool Safety Instructions
are as specified in BS EN 60745-1:2009
& EN 61029-1:2009)
WARNING: Read all safety warnings and
instructions. Failure to follow the warnings
and instructions may result in electric shock,
fire and / or serious injury.
Save all warnings and instructions for
future reference. The term "power tool" in
the warnings refers to your mains-operated
(corded) power tool or battery-operated
(cordless) power tool.
10