Oase biOrb AIR 60 Notice D'emploi page 21

Adjusting the 24h cycle
 K
How to proceed:
1. biOrb AIR 60 Close the container cover, then press
and hold the adjustment button for approx. 3 s.
– The lighting starts in a 24 hour cycle. Each cycle
starts with a continuous lighting increase
(30 min) and ends with a continuous lighting re-
duction (30 min).
– The setting is confirmed by a brief change in the
lighting (reduction and increase).
2. To change the starting time press and hold the ad-
justment button drepessed at the desired starting
time for approx. 3 s.
Setting the automatic misting unit
The humidification volume can be varied depending
on the type of plant.
Recommendation:
• Low amount of plants: low humidification
• Medium amount of plants: medium humidification
• High amount of plants: high humidification
How to proceed:
 K
1. Open the biOrb AIR 60 container cover.
– The setting process is activated.
2. Briefly press adjustment button 1 ×.
– The current setting is signalled by the lighting
flashing.
3. To change the humidification amount briefly press
the adjustment button 1 ×.
– The setting is signalled by the lighting flashing.
4. Close the container cover.
– The setting is saved.
Humidification volume
Low
Medium
High
Lighting flashes
1 ×
2 ×
3 ×
Setting the fan speed
The fan speed can vary depending on the type of plant.
Recommendation:
• Low amount of plants: low speed
• Medium amount of plants: medium speed
• High amount of plants: high speed
How to proceed:
 K
1. Open the biOrb AIR 60 container cover.
– The setting process is activated.
2. Press and hold the adjustment button until the
lighting is extinguished, then briefly press the ad-
justment button 1 ×.
– The adjustment is signalled by the lighting flash-
ing.
3. To change the fan speed briefly press the adjust-
ment button 1 ×.
– The adjustment is signalled by the lighting flash-
ing.
4. Close the container cover.
– The setting is saved.
Fan speed
Low
Medium
High
- EN -
Lighting flashes
1 ×
2 ×
3 ×
21