Running-In; Cleaning And Maintenance; Disposal - Dali ZENSOR AX Manuel

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

UK
DE
DK
FR
JP
5.7 auto poWer oFF
The ZENSOR AX will automatically power off if no signal has been detected for 15 minutes.
To power on the ZENSOR AX again either activate a signal on any input, select an input on the
remote control, use the source button on the back of the left speaker or press the power button
on the remote control.
Note: Auto power off on OPTICAL IN is controlled by the carrier light. If your optical device
does not disables the red carrier light when turned off the ZENSOR AX will not auto power off
if OPTICAL IN is selected.
6.0 R u N N I N G - I N
Like any mechanical system, a loudspeaker requires a "running-in" period to perform at its
best. You will experience a gradual increase in sound quality during the first period of use. The
break-in period will vary depending on use and playback volume. You should expect up to 100
hours of playback until maximum performance is reached. Unlike other mechanical systems,
the life-span of a loudspeaker is increased by normal, regular playback of music.
7.0 C L E A N I N G A N D M A I N T E N A N C E
Clean the cabinets with a soft, dry cloth. If the cabinets are dirty, wipe with a soft cloth dipped in
all-purpose cleaner and then well wrung out. Be very careful when wiping the speaker cones,
as they are very fragile. Front grilles can be cleaned with a clothes brush and wiped with a well
wrung, lint-free cloth and mild all-purpose cleaner.
7.1 aVoID DIreCt SuNLIGHt
The surfaces of the speakers may fade or become discoloured over time when exposed to
direct sunlight. Therefore avoid positioning the speakers in direct sunlight.
8.0 D I S P O SA L
If you want to dispose of this product, do not mix it with general household waste. There is
a separate collection system for used electronic products in accordance with legislation that
requires proper treatment, recovery and recycling. Private households in the EU member states,
Switzerland, Liechtenstein and Norway may return their used electronic products free of charge
to designated collection facilities or to a retailer (if you purchase a similar new one). If you reside
in countries not mentioned above, please contact your local authorities for the correct method
of disposal. By following this process, you will ensure that your disposed product undergoes the
necessary treatment, recovery and recycling and thus prevent potential negative effects on the
environment and human health.
11

Publicité

Table des Matières
loading

Table des Matières