How It Works; Operating The Unit - Petsafe PDT00-11876 Manuel D'utilisation

ENGLISH

How it works

1. The unit is activated when the internal microphone picks
up the constant barking sound from the dog.
2. The activated unit emits a two-second ultrasonic sound that
can only be heard by the dog.
3. Startled by the high-pitched sound, the dog should stop
barking, as it will associate its bark with this unpleasant
noise.
* NOTE: When the battery voltage is low, the red indicator
light will flash once every six seconds signifying
that the battery should be replaced
1
400-492-19 2

Operating the Unit

1. Place the unit in the area where the dog is barking.
* NOTE:The unit should be 10 feet or less from the barking dog.
2. The unit is equipped with a "Manual Correction" button
that can be used to correct unwanted behaviors such as
lying on the furniture or getting into the trash can. Simply
push the "Manual Correction" button and the unit will
emit a two-second ultrasonic sound. If the button is held
down, the unit will repeat the process in two second
intervals (two seconds on, two seconds off, two seconds
on, etc...)
* NOTE: While in "Manual Correction" mode, the unit
should be 20 feet or less from the misbehaving dog.
7/2/03, 2:52 PM
FR
Fonc
1. L'
br
2. Un
de
3. Su
ca
* RE