DESCRIPTION OF THE VIEW IMAGES MENU
On the left-hand side of the screen are a number of contextual help icons; these show which
buttons you should press to view the previous image, delete the present image or exit from
the View Images Menu.
1
04/04
7
NEXT
1
6
2
DEL
EXIT
OK
5
SYSTEM STATUS INDICATOR
To make it easier to use the different functions, the monitor is equipped with a blue/green/red
indicator (5). Under normal operating conditions, this indicator behaves as described below
in ascending order of priority:
BLUE, STEADY: Monitor is powered and ready for use.
BLUE, BLINKING: This indicates the existence of images that have not yet been seen (see page
22). The LED will stop blinking when all the images have been viewed.
GREEN, STEADY: This indicates that the automatic door-opening feature has been enabled
(see page 19).
RED, STEADY: This indicates that the volume control of the call tone is set to silence (see page
24).
RED, BLINKING SLOWLY: This indicates that the safety feature which detects whether the street
door is open or badly closed has been activated (see page 20).
GREEN, BLINKING: This confi rms that door-opening is being activated.
RED, BLINKING RAPIDLY: This indicates that the system is engaged and that it is necessary to
wait several seconds for it to become disengaged again.
2-WIRE VIDEODOOR ENTRY SYSTEM MONITOR
UNVIEW
00
10:22
27/03/2013
4
3
2
1. Number of the image being displayed and
total number of saved images
2. Number of images that have not yet been
viewed
3. Date of the image
4. Time of the image
5. Quit View images menu icon
6. Delete image icon
7. Show previous image icon
ENG-23