Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

ENG-20
2-WIRE VIDEODOOR ENTRY SYSTEM MONITOR
SIGNAL THAT DOOR IS NOT PROPERLY CLOSED
In installations equipped to offer this function, the system status indicator LED (5) becomes
red and blinks, thereby warning you that the door of your building is open. For more details,
consult your installer.
5
2 minutes
Indicator blinking
aproximately
in red colour

AUXILIARY FUNCTIONS

The monitor allows you to activate 2 auxiliary functions, such as those controlling garage
doors or lighting systems. For details, consult your installer. You can enable these functions
when the monitor is active, i.e. when a call is received or following an automatic switch-on. To
enable the auxiliary 1 function, briefl y press the
. button. To enable the auxiliary 2 function,
1
briefl y press the
button.
2
Auxiliary function 1
Auxiliary function 2
2
1
HOW TO ACTIVATE THE LOOPED AUTOMATIC SWITCH-ON SYSTEM
Press the automatic switch-on button
. You will be able to view the image captured by the
camera, open the street door and, on picking up the receiver, establish communication with
the entrance panel.
If any other monitor is active when you press the automatic switch-on button
, the system
status indicator (5) will become red and blink for a short period, indicating that automatic
switch-on cannot take place. If you pick up the receiver, you will hear a beeping tone. In such
a case, wait until the system is no longer engaged.
5
Time of auto
Time of
switch-on
auto switch-on:
Maximum time limit:
60 seconds (1)
30 seconds (1)
Flat
Auto switch-on
(1) The values shown may vary depending on the installation. Consult your installer

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

9630051

Table des Matières