Kerbl 29924 Mode D'emploi page 14

8. Specifications
Model number
29924
Accuracy class
Calibration value
Platform
Net/gross weight
Display
Operation Temperature
Power source
**WARNING**
Cell-Phones, Cordless-Phones and any radio-frequency device can cause temporary interference and cause the scale to temporarily
not work properly. While there is NO risk of permanent damage to the scale, interference can cause an incorrect calibration or
incorrect weight readings.
8.1 Interface description (optional: Software + data cable)
ASC II code parameter
Baud rate 9600
Parity bit none
Data bit 8
Stop bit 1
CE-conformity declaration
Albert KERBL GmbH hereby declares that the product / device described in these instructions complies with the fundamental requirements and other
relevant stipulations and regulations. The CE mark confirms compliance with the Directives of the European Union.
Electronic scrap
Disposing of this device after its service life is the responsibility of the operator. Please consult the valid national regulations. The device must not be disposed of in
household waste. In accordance with the stipulations of the EU Directive on the Disposal of Electrical and Electronic Devices, the device can be disposed of free of
charge at the local waste collection or recycling centre. Alternatively, it can be returned to retailers who offer a collection service. The proper disposal helps to ensure
environmental protection and prevents any adverse effects on human health and the environment.
Capacity
150 kg
III
e = d = 50 g
330 x 320 mm
4,1 kg/4,5 kg
6-digits, 15 mm high (LCD)
0 – 40 °C
6×AA Batteries or AC/DC Adapter
Charger: 9~12V/100mA
Division
50 g
14