Safety Instructions - Kerbl 29924 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Instructions for use
EN

1. Safety Instructions

WARNING
CAUTION
When using the scale, the following safety precautions should always be followed.
WARNING
• Use only the correct AC adaptor with the scale. Other adaptors may cause permanent electrical damage.
CAUTION
• Avoid placing the scale in direct sunlight, this may cause discoloration or malfunction.
• Replace all batteries at the same time – Do not replace only a portion of the 6 batteries as this may cause a malfunction.
• If the scale is not to be used for a long period of time, remove all batteries from the battery compartment to avoid leakage,
which may cause damage to this scale.
• Avoid overloading the scale, as this may cause permanent damage and void your warranty –
do not EVER exceed the maximum capacity of the scale.
• Keep the scale away from water – this scale is not water resistant. Shock, injury and electrical damage can occur if used in a wet location!
• Matter charged with static electricity could affect accuracy. Discharge all static electricity. For example, one method is to use Static-Guard spray,
and spray it on both sides of the weighing platform.
2. Description
• Side
AC adaptor
Socket
ON/OFF key
Turns the scale
on/off.
HOLD Taste
Remain on the display for 120 seconds
UNIT key
You can change the units (kg or Ib)
ZERO key (for TARE)
Sets display to zero or
subtracts weight of a container
Important information to alert you to a situation
that might cause serious injury and damage to your
property if instructions are
not followed.
Important information that tells how to prevent
damage to the equipment.
11

Publicité

Table des Matières
loading

Table des Matières