Hold Function; Function Settings - Kerbl 29924 Mode D'emploi

• Display
Negative value indicator
Hold indicator
3. Hold - Function
Once the hold key is pressed:
1) The CPU will send weight data into RS232 socket
2) The weight will remain on the display for 120 seconds
1) Place the item on the scale platform.
2) Wait for the stable indicator.
3) Press the hold key. The "." hold indicator will turn-on.
4) Remove the item from the scale platform. The weight will remain on the display for 120 seconds.
5) Cancel the hold modus: Press the hold key again to cancel the "." hold indicator and return the scale to weight value.

4. Function Settings

4.1 Enter function setting mode:
• Press [ON/OFF] to turn the power off, Press [HOLD] first, then press [ON/OFF], while keeping [HOLD] pressed.
The display will show A_ON or A_OFF.
4.2 Selection of auto shut off mode:
• When the balance enters function setting menu, the display will show A_ON or A_OFF.
• Press [ZERO] key, selection display A_ON, this means auto shut off function (after 2 min.) active.
• Press [ZERO] again, the display will show A_OFF, this means auto shut off function inactive.
4.3 Selection of auto backlight mode:
• When the balance enters function setting menu press [HOLD] key, the display will show L_ON or L_OFF.
• Press [ZERO] key, selection display L_ON, this means auto backlight function is active.
• Press again, the display will show L_OFF, this means auto backlight function is inactive.
ZERO indicator
12
Weighing unit
Stable indicator
Low battery indicator