ResMed Mirage Micro Mode D'emploi page 7

Reassembling the Mask
1
Insert the ports cap.
4
(a)
Insert the forehead support (a) into the mask frame and
screw (b) the dial clockwise onto the pole. Turn the dial
until it clicks (c). Ensure the dial sits flush against the
frame.
6
Insert the assembled
elbow into the mask frame.
2
Insert the cushion into the
mask frame. Ensure that
the arrows at base of the
cushion and mask frame
are aligned.
(b)
7
Reattach the top headgear
straps by threading them
through the loops.
Push the forehead pads
firmly into the forehead
support.
(c)
Insert the swivel into the
end of the elbow.
6
3
5