Application; Description - SKF THAP 030 Mode D'emploi

1

APPLICATION

The THAP air-driven pumps are available in two different versions. They are used
for mounting and dismounting OK-couplings, for large pressure joints like
bearings, fly wheels, railway wheels and in many other similar applications. By
using air-driven pumps, a considerable amount of time can be saved compared to
hand operated equipment. For oil pressures higher than 150 MPa (21,750 psi),
consider using the THAP 300E.
2

DESCRIPTION

The THAP generates the high oil pressure with an air-driven hydraulic pump.
Connect only to a dry and clean air supply. The pumps are delivered ready for use
in a transport box, complete with suction hose, return hose and quick connection
couplings. They are equipped with a male G 3/4" connection, to be screwed directly
into the workpiece. As alternative, they can also be used in combination with the
appropriate SKF hydraulic accessories. Complete sets consisting of the air-driven
pump and the appropriate accessories are shown in section 5.
SKF THAP 030/150 7