Taurus Babel RC Mode D'emploi page 14

Timer function:
- The appliance's operating time can
be controlled.
- To program the operating time
simply select it using the (E) control
button.
- The fan is equipped with a timer
that allows you to set its length of
operation from 0,5h to 7,5h.
Oscillation function:
- The oscillation function makes it
possible to direct the flow from the
apparatus so that it automatically
alternates over a range of 70º
- To activate this function, press the
(B) button
- To deactivate this function, follow
the procedure for switching it on in
reverse.
Using the air flow options:
- Choose the desired air flow option
by pressing the air flow selection
button (D)
NM – Normal flow, continuous air flow
NT – Natural flow, soft air flow
SL – Sleeping , intermittent air flow
Once you have finished using the
appliance:
- Stop the appliance, selecting posi-
tion 0 on the selector control.
- Unplug the appliance from the
mains.
Carry handle/s:
- This appliance has a handle on
the upper part of the body, which
facilitates comfortable transportation
(Fig. 3).
Manual Babel RC.indb 14
Cleaning
- Disconnect the appliance from the
mains and allow it to cool before
undertaking any cleaning task.
- Clean the equipment with a damp
cloth with a few drops of washing-up
liquid and then dry.
- Do not use solvents, or products
with an acid or base pH such as blea-
ch, or abrasive products, for cleaning
the appliance.
- Do not let water or any other liquid
get into the air vents to avoid damage
to the inner parts of the appliance.
- Never submerge the appliance in
water or any other liquid or place it
under running water.
Anomalies and repair
- Take the appliance to an authorised
technical support service if product is
damaged or other problems arise. Do
not attempt to disassemble or repair
the appliance yourself as this may be
dangerous.
- In case of breakdown call the
customer service telephone number
indicated in the guarantee sheet. Do
not attempt to disassemble or repair
the appliance yourself as this may be
dangerous.
- If the connection to the mains has
been damaged, it must be replaced
and you should proceed as you would
in the case of damage.
13/02/12 12:52