Publicité
Les langues disponibles
Les langues disponibles
OBJ_BUCH-0000000240-001.book Page 8 Wednesday, December 9, 2015 11:30 AM
en
8
Operation of the power tool off power
generators.
This power tool is also suitable for use
with AC generators with sufficient power
output that correspond to the Standard
ISO 8528, design type G2. This Standard is
particularly not complied with when the so-
called distortion factor exceeds 10 %. When
in doubt, please refer to the generator
instruction/specification guide.
Symbols.
Symbol, character
Explanation
Observe the instructions in the text or graphic opposite!
General prohibition sign. This action is prohibited.
Make sure to read the enclosed documents such as the Instruction
Manual and the General Safety Instructions.
Do not touch the saw blade. Danger of sharp application tools moving
back and forth.
Warning against sharp edges of application tools, such as the cutting
edges of the cutter blades.
Before commencing this working step, pull the power plug out of
thesocket. Otherwise there will be danger of injury if the power tool
should start unintentionally.
Use eye protection during operation.
Wear hearing protection while working.
Use a dust mask during operation.
Use protective gloves during operation.
Observe the notes in the text aside!
This symbol confirms the certification of this product for the USA and
Canada.
This sign warns of a directly imminent, dangerous situation. A false
DANGER
reaction can cause a severe or fatal injury.
This sign indicates a possible dangerous situation that could cause severe
WARNING
or fatal injury.
This sign warns of a possible dangerous situation that could cause injury.
CAUTION
Operating the power tool off
WARNING
power generators whose no-
load speed exceeds the voltage value on the
type plate of the power tool is prohibited.
Publicité
