Display Components - Vestfrost R-90 Notice D'utilisation

EN

Display components

LEDS -
Each LED function is described in the following table.
LED MODE
ON
Flashing
ON
Flashing
ON
Flashing
ON
ON
ON
Flashing
Flashing
°C/°F ON
°C/°F Flashing
Buttons
SET
To display target set point in programming mode it selects a parameter og
confirm an operation.
(UP) To enter fast access menu In programming mode it browses the
parameter codes or increases the displayed value.
(DOWN) In programming mode it browses the parameter codes or decreas-
es the displayed value.
Export data from button.
DATA
Not relevant.
REC
Log activation and deactivation from button (Password protected).
Function
Compressor enabled
Anti-short cycle delay enabled
Defrost enabled
Drip time in progress
Fan enabled
Fan delay after defrost in progress
An alarm is occurring
Recording activated
Battery status OK
Battery is beeing charged
Charging problem or battery failure
Measurement unit
Programming phase
Vestfrost Solutions 13