BEDIENUNGSANLEITUNG/ USER MANUAL/ MANUEL D'UTILISATION
FIXATION FRONT PANEL
To Remove the panel holder from the
housing, press both side walls of the panel
holders an pull the complete front panel
holder out of the housing.
Version 12.10 Art. 0894552
The housing has three holes where
the front panel holder is positioned.
The panel holder has three pins
that corresponds with these holes.
To fixate the panel holder there are
two click fingers on each side,
these fingers will snap behind the
housing and fixate the panel holder
into the housing.
Position the panel holder exactly in
line with the three holes in the
housing.
Now push the panel holder towards
the housing.
Now push the side wall of the
panel holder a little together, while
doing this push the panel holder
into the housing.
Saro
60