Machine Maintenance - saro SVM Manuel D'utilisation

BEDIENUNGSANLEITUNG/ USER MANUAL/ MANUEL D'UTILISATION

MACHINE MAINTENANCE

GENERAL
Regular, thorough maintenance is essential for extending the machine's life, for preventing malfunctions and for
achieving an optimal packaging result. If the machine is used intensively (more than 5 hours per day) then it is a
professional service is recommended every 6 months. In other cases one complete service per year is sufficient
(depending on location, environment and products).
There are however also small maintenance activities that must be carried out more regularly and that the user can do
himself. The following page contains an overview of these activities.
IMPORTANT BEFORE AND DURING MAINTENANCE
The machine must always be completely voltage free before any maintenance is carried out on it. Always remove the
plug from the wall socket.
If the machine is not functioning properly or if it produces strange noises, turn it off immediately with the ON/OFF
switch and contact the supplier or SARO .
When cleaning transparent lids NEVER use cleaning agents containing solvents. Check at least once a week if there
are cracks in the lid. In case of cracks, turn off the machine immediately and contact the supplier or SARO .
High pressure cleaning is not permitted for cleaning the machine. High pressure cleaning can cause considerable
damage to electronic and other parts of the machine.
Water may never be permitted to enter either the extraction nozzle of the chamber or the blow-off hole of the pump.
This would cause irreparable damage to the pump.
Larger services must always be carried out by an authorised supplier.
The SVM machine is designed for a maximum of 5 hours per day. The supplier or SARO cannot be held
responsible for any malfunctions or defects if these operating limits are clearly exceeded without consultation.
The machine must be moved or transported in an upright position. The machine may NOT be tilted as this can cause
damage to the pump.
The supplier or SARO cannot be held responsible for any malfunctions or defects if the maintenance instructions in
this manual are not followed.
Version 12.10 Art. 0894552
Saro
44