Picture Menu - Eneo VMC-17LCD-OPC1 Mode D'emploi

5.2 OSD Menu Description
Menu Selection
. Press the MENU / EXIT key to access the Main menu.
. Use the and arrow key to highlight a selection.
3. Press the / SELECT key to select an item.
4. Use the and arrow key to highlight a selection.
5. Use the and arrow key to adjust the setting on a selected item.
NOTE: If you don't connect RGB port, RGB SETUP menu is not select.
5.2.1 INPUT Select
Inputs can be set to VIDEO, VIDEO, S-VIDEO and RGB mode.
Press the SOURCE / key then you can change the input source.

5.2.2 PICTURE Menu

. Press the MENU / EXIT key and then / key to select the PICTURE menu.
. Press the / SELECT key and then / key to select the adjustment item you need.
3. Press the / SELECT key to active the item.
Example: If you select the BRIGHTNESS, then the picture below appears on the screen.
4. Press the MENU / EXIT key to move the previous menu.
NOTE: TINT item is NTSC input only.
7