Connecting With External Device - Eneo VMC-17LCD-OPC1 Mode D'emploi

4. Connecting with External Device

Bottom panel control
1. DC 12V IN
2. RGB IN
RGB signal input
3. VIDEO 1 (AV1) IN
Composite signal input for AV
4. VIDEO 1 (AV1) OUT
Video looping output for AV
5. VIDEO 2 (AV2) IN
Composite signal input for AV
6. VIDEO 2 (AV2) OUT
Video looping output for AV
7. AUDIO 1 IN
Stereo audio signal input.
This input is for AV, S-VIDEO
8. AUDIO 2 IN
Stereo audio signal input.
This output is for AV
9. S-VIDEO (Y/C) IN
Y/C separated signal input
10. S-VIDEO (Y/C) OUT
Y/C separated signal looping output
11. PC STEREO IN
5