Télécharger Imprimer la page

Publicité

Liens rapides

Anbauanleitung
Fitting Instruction
Notice de Montage
Artikel-Nr. / Part-No. / N° article : 405Y129
Produkt / Product / Produit : Lampenhalter / Headlight Bracket / Support clignotant
Marke / Brand / Application : Yamaha
Modell / Model / Modèle : MT-09
´14
Wichtig: Wenn Sie kein ausgebildeter Mechaniker sind, wenden Sie sich bitte an eine Fachwerkstatt.
Achten Sie darauf, dass das Vorderrad des Motorrades vollständig entlastet ist wenn Sie die obere
Gabelbrücke demontieren.
Important: If you are not a trained motorcycle mechanic stop now. Ask a local motorcycle shop to do the
work for you. Take care that no load is on the front wheel when removing the top yoke.
Important: Adressez-vous à un atelier spécialisé si vous n'êtes pas mécanicien. Pour le démontage du
té de fourche supérieur, la roue avant doit être complètement déchargée.
Montagevorbereitung / Mounting preparation / Préparation pour le montage:
Demontieren Sie die obere Gabelbrücke und den Scheinwerfer einschließlich Halter gemäß den
Vorgaben des Fahrzeugherstellers.
Demount top yoke and headlights, including its bracket, according to the vehicle manufacturer's
instructions.
Démontez le té de fourche supérieur et le phare y.c. son support selon les directives du fabricant.
Montage / Mounting / Montage:
Accessories from
The Original
————————————————
——
Rev. 00 13/01/2014

Publicité

loading

Sommaire des Matières pour LSL 405Y129

  • Page 1 Anbauanleitung Fitting Instruction Notice de Montage Artikel-Nr. / Part-No. / N° article : 405Y129 Produkt / Product / Produit : Lampenhalter / Headlight Bracket / Support clignotant Marke / Brand / Application : Yamaha Modell / Model / Modèle : MT-09 ...
  • Page 2 Die Blinker mit den neuen Blinkerhalteblechen, Schrauben M6x12 und U-Scheibe M6 wie abgebildet befestigen. Die Haltebleche sind für die Aufnahme von Zubehörblinkern mit einer Ø8mm Bohrung gefertigt. Zur Montage der originalen Blinker muss die innere Platte mit einem Metallsägeblatt herausgelöst werden und der beiliegende Distanzring verwendet werden.