Marathon MBWC24 Manuel D'utilisation Et D'entretien page 8

Loading your Wine & Beverage Cooler
Depending on the bottle size, you can load your wine bottles in single or double rows provided the bottles
are evenly distributed throughout the wine and/or beverage cooler with small gaps between bottles to ensure
peak chilling and energy efficiency.
Model MBWC24 (Single Zone Wine and Beverage Cooler)
For your convenience, the MBWC24 is convertible from a single zone wine cooler to a full or combina-
tion beverage cooler with the tempered glass shelf inserts. For ease of refrigerating cans, the tempered
glass shelves should be used so that the cans fit flat on the shelf to maximize the capacity. For chilling wine
bottles, simply remove the tempered glass shelf inserts and place the bottles on the beechwood shelves for
optimum chilling. The shelves also pull out and adjustable.
Model MWC24-D (Dual Zone Wine Cooler)
• Do not remove adjustable wooden shelves to accommodate larger type of bottles or increase the capacity
of the cellar by stacking the bottles up when necessary. (See removing shelves)
ATTENTION
! !
• Do not overload your wine cellar as this will affect air circulation.
• Do not stack more than 1.5 rows of standard 750ML bottles per shelves to facilitate air circulation
• Avoid obstructing the fan cooled system located inside the wine and beverage cooler at the back panel.
• Do not slide the shelves outwards beyond the fixed position to prevent the bottles from falling
• Do not pull out more than one loaded shelf at a time as this may cause the wine cellar to tilt forward.
• Do not cover the wooden shelves with aluminum foil or other materials, as it will obstruct air circulation.
• Do not move your wine and beverage cooler when it is loaded with cans or bottles
LED Temperature Control
Important: The LED temperature displays the actual internal air temperature of your Marathon Wine and/or
Beverage cooler.
The temperature settings are preset at the factory and in the event of a power interruption, all previous tem-
perature settings are automatically erased and it will revert back to the factory preset temperature settings.
Once you program your desired temperature setting, it is strongly recommended not to adjust frequently.
The thermostat is accurate and will maintain the temperature inside the wine cellar +/- 2.5º C. Please note
that the depending on the thickness of the wine bottle, and loading, the actual temperature of the wine may
differ from the wine and beverage cooler setting by +/- 1ºC.