Marathon MBWC24 Manuel D'utilisation Et D'entretien page 13

MBWC24 | MWD24-D | MBWC24-2D
Adjusting the Removable Wooden Shelves
MBWC24 and MBWC24-2D
For easy access to the storage content, you must pull the shelves approximately 1/3 of its depth out of the
rail compartment. The shelves designed with a notch on each side of the shelf tracks to prevent bottles from
falling.
When removing any of these shelves out of the rail compartment, tilt the shelf as per the diagram and simply
pull out, or push in the shelf until it sits on the support brackets securely. Then simply press the shelf limit
pin "A" on both sides and then lift slightly and pull gently to remove .
A
A A
1. "A" is shelf limit pin
MWC24-D: To remove pull out the shelf to support bracket j , press two sides of sliding roller buckles and
pull out the shelf following the arrow mark k . To reinstall push in the shelf alignment with two sides of
sliding roller following the arrow mark l .