Unit Description - BoomToneDJ PARTYPAR 541 Mode D'emploi

2- Unit Description


Button:

① MENU

② UP

③ DOWN

④ ENTER

⑤Signal indicator light In DMX or SLAVE mode, if detected signals, the

Signal indicator light flashing
Note:
(1)In ten seconds, if no button was pressed, the LED display to turn off. Press any
button.
to turn on the LED display again.
(2)Whenever had any button be pressed, program will save all parameter after 2
seconds,
(3)No matter what the program in which mode,once to detect the DMX or SLAVE
signal,
the program will jump into DMX or SLAVE mode automatically. Then, if DMX or SLAVE
signal was disconnect, the program will return to the original mode.
This BoomToneDJ fixture is complying with European standards:
- Directive LVD n°2014/35/EU
- Directive RoHS 2 n°2011/65/UE
- Directive EMC n°2014/30/EU
To go forward select menu or go back the last level menu
To go forward select menu or increase parameters
To go backward select menu or reduce parameters
Go into the next level menu
8