Fuse Replacement - Ibiza Light MHSPOT30-FX Manuel D'utilisation

Function Value
102-107
108-113
114-119
120-125
Halo Effect
126-131
132-179
180-217
218-255
000-027
028-082
083-112
Auto Mode 113-168
169-199
200-239
240-255
6.

FUSE REPLACEMENT

Locate and remove the unit's power cord. Once the cord has been removed located the fuse holder inside the power
socket. Insert a flat-head screw driver into the power socket and gently pry out the fuse holder. Remove the bad fuse
and replace with a new one. The fuse holder has a built-in socket for a spare fuse. Be sure not to confuse the spare fuse
with the active fuse.
Warning: If after replacing the fuse you continue to blow fuses, STOP using the unit. Contact customer support for
further instructions. Continuing to use the unit may cause serious damage.
7. CLEANING
Fixture Cleaning: Due to fog residue, smoke, and dust cleaning the internal and external lenses should be carried out
periodically to optimize light output.
1. Use normal glass cleaner and a soft cloth to wipe down the outer case.
2. Use a brush to clean the cooling vents and fan grill.
3. Clean the external optics with a glass cleaner and a soft cloth every 20 days.
4. Clean the internal optics with a glass cleaner and a soft cloth every 30-60 days.
5. Always be sure to dry all parts completely before plugging the unit back in.
8. TROUBLE SHOOTING
Listed below is a problem that you may encounter, with a solution.
No light output from the unit;
1. Be sure the fuse has not blown. The fuse is located on the rear panel inside the power socket. See Fuse Replacement.
2. Be sure the fuse holder is completely and properly seated.
Auto Sensing Voltage: This fixture contains an automatic voltage switch, which will auto sense the voltage when it
is plugged into a power source.
9. SPECIFICATIONS:
Total power: .................................................................................................................................................................... 55W
Light source: ......................................................................................... 30W white 4in1 LED, 12pcs 5050 RGB 3in1 LED
Color wheel: ................................................................................................................7 color + open , rainbow -flow effect
Gobo wheel: ............................................................................................... 7 gobo + open, gobo - flow effect, gobo shake
Focus ............................................................................................................................................................................Manual
Beam angle: ........................................................................................................................................................... 13 degree
Movement: ......................................................................................................................... Pan 540degree, Tilt 210degree
Control mode: .....................................................................................................DMX512/Master-Slave/Auto run/sound
DMX Channel: .......................................................................................................................................................9CH/11CH
Display: ............................................................................................................................................................... LED display
Operating modes ......................................................8 internal programs , sound mode can be controlled by DMX 512
6
MANUAL - MHSPOT30-FX
Percent / Setting
Opposite Two Part Green
Opposite Two Part Blue
All Red
All Green
All Blue
All Full color
Color Gradual Change
Color Jump Change
No Function
Sound Activity
No Function
Auto Run
No Function
Reset
No Function
Mode Mode
9CH 11CH
8 10
9 11