Polarity Reversal Protection; Maintenance And Cleaning - VOLTCRAFT PSW 1000 Série Notice D'emploi

e) Polarity reversal protection
If the polarity of the input is swapped when connecting, the inverter will not work and cannot
be switched on.
Always observe the correct polarity (plus/+ and minus/-) for connection.
• Red connection terminal = plus pole (+)
• Black connection terminal = minus pole (-)

9. MaINTENaNCE aNd CLEaNING

The product does not require any maintenance. You should never take it apart.
The product should only be repaired by a specialist or specialist workshop or it may be dam-
aged. Furthermore, the CE approval and the guarantee/warranty will expire.
The installed device fuse must only be exchanged by a specialist.
Before cleaning, switch off the product and disconnect it from the voltage/current supply.
Disconnect any connected consumer as well.
Only clean the product with a soft, clean, dry and lint-free cloth. Never use any cleaning
agents, since this might damage the surface of the casing and label.
Dust can be removed using a clean, soft brush and a vacuum cleaner.
36