VOLTCRAFT PSW 1000 Série Notice D'emploi page 27

• The product has an installed fan. Place the product so that the fan cannot suck in
any loose objects, curtains, etc. This not only poses a danger of damage to the
product, but also a danger of fire.
• Never place the product on a flammable surface (e.g. carpet, tablecloth). Always
use a suitable, non-flammable, heatproof surface.
• Do not place the product on any valuable furniture surfaces without using suitable
protection. Heat may cause colour or material changes. Scratches of pressure
points on the furniture surface are possible as well.
• Keep the product away from easily inflammable materials (e.g. curtains, paper),
liquids (e.g. petrol) or gases. There is a risk of fire and explosion!
This specifically applies to gases escaping from rechargeable batteries (e.g. for
lead batteries). Therefore, observe the corresponding ventilation and do not place
the inverter and the rechargeable battery in the same room.
• Keep the inverter away from sources of open fire (e.g. candles), and do not place
them on the inverter.
• The product must be easily accessible so that it can be switched off or discon-
nected from the voltage source and the connected consumer quickly in case of
error.
• Avoid operation in direct proximity of strong magnetic or electromagnetic fields,
transmitter aerials or HF generators. This can affect the control electronics.
• Do not place any containers filled with liquid, e.g. vases or plants, on or next to
the product.
Liquids entering the inverter will destroy it. There also is the utmost risk of poten-
tially fatal electric shock.
In this case, disconnect the product from the voltage/current supply at once. No
longer operate the product. Have the product inspected by a specialist workshop
or dispose of it environmentally compatibly.
• Secure or attach the inverter and all cables, e.g. when using them in a vehicle,
so that proper operation of the vehicle is ensured and the inverter cannot come
loose.
27