Site Of Setup/Installation - VOLTCRAFT PSW 1000 Série Notice D'emploi

• Handle the product with care. It can be damaged by impact, blows or when
dropped even from a low height.
• Observe the operating instructions of all devices that are connected to the
inverter.
• If you are not sure about the correct connection or use of the inverter, or if ques-
tions which are not covered by these operating instructions arise, please do not
hesitate to contact us or another qualified specialist.
b) Site of setup/installation
• Keep children away from the product. Choose the site of setup/installation so that
children cannot reach it. Children may try to stick objects into the device. There is
danger to life from electric shock!
• The product is only suitable for operation in dry, closed rooms. The entire product
must never become moist or wet. There is a fatal danger from electric shock!
• Choose a solid, flat, clean and sufficiently large surface for the product.
• For stationary installation, the product has two mounting brackets with two attach-
ment eyelets each. Use suitable screws and, if applicable, dowels for installation.
When drilling or tightening screws, ensure that no wires or lines are damaged.
• Avoid the following unfavourable ambient conditions at the site of setup/installa-
tion, during storage or when transporting:
- dampness or too-high humidity
- Cold or heat, direct solar radiation
- dust or flammable gases, fumes or solvents
- strong vibration, impact or blows,
- strong magnetic fields such as those near machines or speakers
• Do not operate the product next to radiators, fans, air conditioning or similar.
Keep the product away from dust and dirt.
26