Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
General Information
DESCRIPTION
This submersible pump is designed for use as a
waterfall/fountain or as a utility pump. The unit is
equipped with a 3-prong grounding-type power cord.
Ball bearings on the motor shaft never need lubrication.
Automatic reset thermal protection.
SPECIFICATIONS
Power supply required..................................115V, 60 HZ.
Motor duty .....................................................Continuous*
Liquid temperature range ...............32°F to 77°F (0°-25°C)
Individual branch circuit
requirement (minimum) .......................................15 Amps
* For continuous operation the water depth must be at
least 5" (13 cm) to prevent the motor from overheating.
NOTICE: Not designed for applications involving salt
water or brine! Use with salt water or brine will void
warranty.
PERFORMANCE
Motor
Model
HP
(0 m)
2430
1/3
2,400 (9,085) 1,920 (7,628) 1,380 (5,224)
For parts or assistance, call Simer Customer Service at
GPH (LPH) AT TOTAL FEET (M)
0
5
(1.5 m)
DISCHARGE FITTINGS CHART
Pump
Model No.
2430
ELECTRICAL SPECIFICATIONS
Motor Full Load
Model
H.P.
2430
1/3
10
15
(3 m)
(4.6 m)
780 (2,953)
1-800-468-7867 / 1-800-546-7867
Included Adapters
1-1/4" FNPT x 1-1/4"
Hose Barb Elbow (P/N 007-022)
1-1/4" FNPT x 3/4"
Garden Hose Fitting (P/N ZA000900)
Motor
Minimum
Circuit
Amps
Req. (Amps)
2.3
15
No Flow
20
At Height
(6.1 m)
Shown Below
240 (908)
22' (6.7 m)
4
Pumps
Down
To
7/8" (22 mm)
Publicité
Chapitres
Table des Matières
