Option2 Settings Menu; Setting The Power Management For Computer Images; Power/Standby Indicator; Setting The Picture To Suit The Movie - NEC PlasmaSync 42XM5 Manuel D'utilisation

Option2 Settings Menu

Set "ADVANCED OSM" to "ON" in the MAIN MENU.
Setting the power management for computer
images
This energy-saving (power management) function
automatically reduces the monitor's power consumption
if no operation is performed for a certain amount of time.
Example: Turning the power management function on
On "PWR. MGT." of "OPTION2" menu, select "ON".
PWR. MGT.
CINEMA MODE
LONG LIFE
GRAY LEVEL
S1/S2
PICTURE SIZE
DVI SET UP
PROTOCOL SET
SEL.
Information
Power management function
* The power management function automatically reduces
the monitor's power consumption if the computer's
keyboard or mouse is not operated for a certain amount
of time. This function can be used when using the
monitor with a computer.
* If the computer's power is not turned on or if the
computer and selector tuner are not properly connected,
the system is set to the off state.
* For instructions on using the computer's power
management function, refer to the computer's operating
instructions.
Power management settings
ON: In this mode the power management function is
turned on.
OFF: In this mode the power management function is
turned off.
Power management function and POWER/
STANDBY indicator
The POWER/STANDBY indicator indicates the status
of the power management function. See below for
indicator status and description.

POWER/STANDBY indicator

Power POWER/
management STANDBY
mode indicator
On Green
Off Red
Downloaded From TV-Manual.com Manuals
OPTION 2 2 / 4
PREVIOUS PAGE
: ON
: ON
: 3
: OFF
: ON
: OFF
NEXT PAGE
ADJ. EXIT RETURN
Power Description Turning the picture
management back on
operating status
Not activated. Horizontal and vertical Picture already on.
synchronizing signals
are present from the
computer.
Activated. Horizontal and/or Operate the keyboard or
vertical synchronizing mouse.
signals are not sent reappears.
from the computer.

Setting the picture to suit the movie

The film image is automatically discriminated and
projected in an image mode suited to the picture.
[NTSC, PAL, PAL60, 480I (60 Hz), 525I (60 Hz), 576I
(50 Hz), 625I (50 Hz), 1035I (60 Hz), 1080I (60 Hz) only]
Example: Setting the "CINEMA MODE" to "OFF"
On "CINEMA MODE" of "OPTION2" menu, select "OFF".
Information
CINEMA MODE
ON: Automatic discrimination of the image and
projection in cinema mode.
OFF: Cinema mode does not function.

Reducing image retention

The brightness of the screen, the position of the picture,
positive/negative mode and screen wiper are adjusted to
reduce image retention.
On "OPTION2" menu, select "LONG LIFE", then press the
MENU/ENTER button.
The "LONG LIFE" screen appears.
PLE (Peak Luminance Enhancement)
Use this to activate the brightness limiter.
Example: Setting "PLE" to "LOCK1"
On "PLE" of "LONG LIFE" menu, select "LOCK1".
Information
PLE settings
AUTO: The brightness of the screen is adjusted
The picture
automatically to suit the picture quality.
LOCK1, 2, 3: Sets maximum brightness.
The brightness level decreases in the order of LOCK
1, 2, 3. LOCK 3 provides minimum brightness.
En-26
OPTION 2
PREVIOUS PAGE
PWR. MGT. : OFF
CINEMA MODE : OFF
LONG LIFE
GRAY LEVEL : 3
S1/S2 : OFF
PICTURE SIZE : ON
DVI SET UP
PROTOCOL SET : OFF
NEXT PAGE
SEL. ADJ. EXIT RETURN
LONG LIFE
PLE : AUTO
ORBITER : AUTO1
INVERSE : OFF
SCREEN WIPER : OFF
SOFT FOCUS : OFF
SEL. ADJ. EXIT RETURN
LONG LIFE
PLE : LOCK1
ORBITER : AUTO1
INVERSE : OFF
SCREEN WIPER : OFF
SOFT FOCUS : OFF
SEL. ADJ. EXIT RETURN
2 / 4