12.2
Security instructions
Missing or non-readable security stickers have to be replaced immediately!
To avoid malfunction, machine defects and injuries, read the following security
instructions!
The locally applicable laws and regulations may specify the minimum age of the operator and limit
the use of this machine!
•
Keep your work area dry and tidy! An untidy work area may cause
accidents. Avoid slippery floor.
•
Make sure the work area is lighted sufficiently
•
Do not overload the machine
•
Provide good stability and keep balance all times
•
Avoid abnormal working postures! Make sure you stand squarely and keep
balance at all times.
•
Keep away from the running abrasive!
Always stay focused when working. Reduce distortion sources in your
working environment. The operation of the machine when being tired, as
well as under the influence of alcohol, drugs or concentration influencing
medicaments is forbidden.
•
Respectively trained people only and only one person shall operate the
machine.
•
Do not allow other people, particularly children, to touch the machine or
the cable. Keep them away from your work area.
•
Make your workshop childproof.
Wear suitable work clothes! Do not wear loose clothing or jewelry as they
might get caught in moving parts and cause severe accidents! Wear a hair
net if you have long hair.
•
Use personal safety equipment: dust mask, ear protectors and safety
goggles when working with the machine.
•
Never leave the machine running unattended! Before leaving the working
area switch the machine off and wait until the machine stops.
•
Always disconnect the machine prior to any actions performed at the
machine.
•
Avoid unintentional starting
•
Do not use the machine with damaged switch
•
Keep any machine that is not being used out of reach of children
•
The plug of an electrical tool must strictly correspond to the socket. Do not
use any adapters together with earthed electric tools
•
Each time you work with an electrically operated machine, caution is
advised! There is a risk of electric shock, fire, cutting injury;
•
Protect the machine from dampness (causing a short circuit)
•
Use power tools and machines never in the vicinity of flammable liquids
and gases (danger of explosion)
•
Check the cable regularly for damage
•
When working with the machine outdoors, use extension cables suitable
for outdoor use
•
Do not use the cable to carry the machine or to fix the work piece
•
Protect the cable from heat, oil and sharp edges
Avoid body contact with earthed
HOLZMANN MASCHINEN GmbH
www.holzmann-maschinen.at
SAFETY
22
RSG 620