DJ68-40015Q
7/3/02 1:31 PM
1) PULLING OUT
The power cord is long enough to be drawn out for
convenience.
2) REWINDING
Upon finishing cleaning, disconnect the plug from the
electrical outlet and press the cord rewind button lightly
with your toe.
NOTE :
When removing the power cord from the electrical outlet, grasp the plug, not
the cord.
With the cord plugged into an electrical outlet, start or
stop the vacuum cleaner by stepping lightly on the
switch button.
The suction power can be adjusted with the electrical
power control to suit any situation.
MIN
= For delicate fabrics, like net curtains.
MAX = For hard floors and heavily soiled carpets.
* Manual suction power control
The flexible hose hose handle(suction control) has a
manual air flow regulator which allows you to briefly alter
the suction level : the further open the regulator is, the
weaker the suction power.
Page 7
-5
EN
POWER CORD
ON/OFF SWITCH
POWER CONTROL