Replacing The Dust Bag - Samsung VAC9073BP Guide De L'utilisateur

DJ68-40015Q 7/3/02 1:31 PM
1) To open the dust cover of the dust bag
compartment, press the clamp upward
located at the side of the dust cover.
3) After removing the used dust bag,insert
the cardboard bag collar of the new
dust bag into the suction inlet all the
way.
NOTE :
If you are using a cloth filter bag, clean it when it's full and use it again.
NOTE :
A used dust bag can be sealed by removing the paper from the adhesive
strip and sealing the strip over the suction opening.
Page 9

REPLACING THE DUST BAG

2) Remove the dust bag from the cleaner.
4) Press the dust cover down gently until
the clamp relocks.
-7
EN