Samsung VAC9073BP Guide De L'utilisateur page 9

DJ68-40015Q 7/3/02 1:31 PM
VACUUMING WITH THE POWER BRUSH
1. Attaching the Power Brush
The hose must be plugged into the canister and the power
brush must be plugged into the hose and extension wand
(see page 3).
2. Vacuuming
For best results, move the power brush slowly using short, over-
lapping strokes.
For heavily soiled areas, repeat strokes in several directions.
Turn height adjustment knob to match the surface
beingcleaned.(optional)
CAUTION:
Do not invert the power brush while it is running
3. Checking the Performance of the Power Brush
You may check whether the power brush is operating correctly by lifting up the
extension tube slightly to view the back of the brush.
The Power Brush will not operate when it is jammed or the unit is turned off.
If the Power Brush is jammed, Unplug the power cord from the electrical outlet. Turn the
power brush over and remove the jammed object.
Turn the power brush back to vacuuming position and resume vacuuming.
MAINTAINING THE POWER BRUSH
1. Removing the Brush Cover
Before replacing any parts, unplug the vacuum
cleaner from the electrical outlet.
Remove 6 screws from the bottom plate and
open the brush cover.
2. Replacing the Headlight Bulb(optional)
1) Remove the Brush Cover as
described below.
Page 10
2) Remove the old bulb from the bulb
socket.
Insert the new bulb. You can use a
vacuum cleaner lamp rated 120V,
20W.
-8
EN