Content Of The Box - Blue connect Mode D'emploi

» Make sure the top part of the unit is out of the water to allow the communication system to work.
» Do not leave Blue Connect in water with a temperature below 5°C or above 50°C.
» Keep the Blue Connect serial number and key
» Store Blue Connect sheltered from frost.

Content of the box

On the back of the quick start guide and on Blue Connect's storage cap.
2
.
2
Blue Connect analyser: Delivered secured on the storage cap to
protect the probe during transportation. The probe is immersed in KCI
(saturated potassium chloride), which assures its protection.
The storage cap: Used to transport the probe out of the water or to
keep the sensors immersed during an extended storage (in winter
for example).
The usage cap: Must always be mounted on the device before placing
it in water. It protects the sensors from any damage.
Cord: Allows to fix the device to a point of attachment.
Quick start guide: Helps you with the device start-up.
3