Blue connect Mode D'emploi page 14

14.
Screw the nut all the way onto the device. Do not hesitate to use a cloth to tighten it properly
to avoid hurting your hand. Then, place the usage cap and place Blue Connect back in the
water.
NB: The sensor may take a few hours to stabilise its parameters after its first immersion in the
swimming pool.
D. Putting Blue Connect into standby mode for winterization/storage
Winterization:
1.
Remove Blue Connect from the water. Remove the usage cap.
2.
Activate the Internet (Wi-Fi or 4G) and Bluetooth® on your smartphone.
NB: Stay close to the device throughout the whole standby process.
3.
In the app, in "Settings" » "My Blue Connect", press on "Put Blue Connect in stand by".
14