General Information - Blue connect Mode D'emploi

4.
In the app, in "Settings" » "My Blue Connect" press "Put Blue Connect into standby mode".
5.
Rinse the storage cap and wipe it. Add KCl
storage cap and screw it.
6.
Validate the standby mode and store Blue Connect sheltered from frost.
Feel free to check our online support website to benefit from a remote help:
www.blueconnect.io (assistance).

General information

Warranties
» Product + probes warranty: 24 months.
» Battery warranty: 12 months.
Riiot Labs does not offer any warranty against the deterioration of the material following a
manipulation of this latter, in particular the replacement of probe and battery, nor against the
damages following the drying of the probes, nor against the wear and normal aging of the product,
nor against the damages caused by an accident or a misuse. Riiot Labs does not offer any warranty in
case of nonobservance of the precautions for use.
How to recycle this product
This symbol indicates that this product must be disposed of in accordance with applicable
legal requirements and separated from domestic waste. At the end of the product's life
span, please take it to an official collection point. Sorting and recycling your product help
protect the stocks of raw materials and guarantee that all guidelines relative to health and
environment protection are respected as part of the recycling.
The KCl present in the storage cap can cause the formation of agglomerated salt at the junction with the body of the device,
10
but this is not dangerous in any case. Simply rinse with clear water.
(saturated potassium chloride) or pH4 in the
10
20