Blue connect Mode D'emploi page 15

4.
Rinse the storage cap with clean water and wipe it. Place KCI
or pH4 in the storage cap and screw it.
5.
Validate the standby mode and store Blue Connect sheltered from frost.
Storage:
If you need to take Blue Connect out of the pool for more than an hour, screw it on storage cap with
KCI (saturated potassium chloride), pH4, or as a last resort, running water with a good amount of
cooking salt as the probe should not be left dry.
E. Activating Blue Connect after winterization
1.
In "Settings" » "My Blue Connect", press on "Activate Blue Connect".
2.
See "Blue Connect installation" from point 2.
The KCl present in the storage cap can cause the formation of agglomerated salt at the junction with the body of the device,
9
but this is not dangerous in any case. Simply rinse with clear water.
(saturated potassium chloride)
9
15