Displays; Led System Key - Altech V3 IP Mode D'emploi

Displays

Parameters
Time interval for pump
protection function
(only available for HZ1)
Cooling in cooling
mode
Heating in heating
mode
Room with/without
external heat source
Selection of heating
system
9 Displays
9.1

LED System key

Display
Short fl shing, orange
1 long lighting, green
1 long lighting, red
Short fl shing, orange
(once every 10 sec-
onds)
1 long lighting, red
6x long fl shing, red
1 lighting in orange and
1 lighting in green
9.2 LED Select key
Display
Slow fl shing
Index Value
P051 225
226
...
238 (default)
...
251
252
P052 0
1 (default)
P053 0
1 (default)
P054 0 (default)
1
2
P055 0 (default)
1
2
3
4
Meaning
Radio transmission/
transmission attempt/
data transmission
Process confirme
Process failed
Teach-in mode active
Process failed or duty
cycle limit reached
Device defective
Test indication
Meaning
Emergency operation
active
Meaning
1 day
2 days
...
14 days
...
27 days
28 days
inactive
active
inactive
active
without
with fi eplace
with towel rail heating
Floor heating, standard
Floor heating, low energy
Radiator
Convector, passive
Convector, active
Solution
Wait until the transmission has ended.
You can continue your operations.
Retry.
Enter the last four digits of the serial number of the
device for confir ation.
Retry.
Observe the information in your app or contact your
specialist dealer.
You can proceed after the test indication has gone out.
Solution
Change the batteries of the wall thermostat, perform a
radio test, reposition the wall thermostat if necessary,
replace a defective wall thermostat.
Displays
DK
NO
SE
FI
FR
GB
GB
71