Locating A Specific Track Or A Point In A Track - Sony CDP-CA9ES Mode D'emploi

Locating a Specific Track or a
Point in a Track
You can quickly locate any track while playing a disc
using the ≠/± (AMS: Automatic Music Sensor)
buttons or number buttons. You can also locate a
specific point in a track while playing a disc.
Number buttons >10
RM-D645 for CDP-CA9ES
MUSIC SCAN
>20
(
=/+
0/)
RM-D515 for CDP-CA8ES
MUSIC SCAN
>20
(
=/+
0/)
To locate
The next or
succeeding tracks
The current or
preceding tracks
A specific track
directly
A track by scanning
≠/±
each track for 10
seconds (Music
Scan)
A point while
monitoring the sound
A point quickly by
observing the display
during pause
Number
buttons
Note
If "–OVER–" appears in the display, the disc has reached the
end while you were pressing ). Press 0 or ≠ to go
back.
Number
buttons
Press
± repeatedly until you find the
track
≠ repeatedly until you find the
track
Number button of the track
MUSIC SCAN before you start playing
in 1 DISC Continuous Play mode.
When you find the track you want,
press ( to start playing.
) (forward) or 0 (backward) and
hold down until you find the point
0/) and hold down until you
find the point. You will not hear the
sound during the operation.
When you directly locate a track numbered over 10
(or 20 when using the remote)
Press >10 (or >20 on the remote) first, then the
corresponding number buttons. To enter "0," use button
10.
Example: To play track number 30
Press >10 (or >20 on the remote) first, then 3
and 10.
You can extend the playing time during Music Scan
Press MUSIC SCAN repeatedly until the playing time
you want (10, 20 or 30) appears in the display. Each time
you press the button, the playing time changes cyclically.
Playing CDs
EN
9