Technical Specifications - Tanita KP-601 Mode D'emploi

TECHNICAL SPECIFICATIONS

Test weight 100 g (included)
Capacity 100.000 g / 500.00 ct / 3.5273 oz /3.2150 ozt / 64.300 dwt /
1543.25 grain
Graduation 0.002 g / 0.01 ct / 0.0001 oz / 0.0001 ozt / 0.002 dwt / 0.05 grain
Power DC 6V AA (LR06) x 4 (included)
AC adaptor (DC 6V 200 mA) (included)
Power Consumption Dual LCD: 45 mA, single LCD: 40 mA
(MAX)
*Not legal for trade
OUTPUT DATA FORMAT (USB verison only)
This section covers the exporting of data from the scale to an external device (e.g. PC) using a
USB compliant signal.
• USB interface is for data OUTPUT ONLY!
• This scale is not capable of receiving instructions from an external device.
Specifications
Communications standard
Communications method
Signal speed
Data bit length
Parity
Stop bit
Terminator
Note:
• USB connecter (mini-B-type 4-pin female) is located on the side of the scale.
Caution
If you want to use the USB output, you must install the necessary driver onto your
PC, available to download from http://www.tanita.com
8
USB
Asynchronous transaction
9600 baud
8 bits
None
1 bit
CR+LF
USB Port
Output data
Name of item Header Output data (ASCII code)
Control data {0 Fix to 16
Control data ˜0 Fix to 1
Model MO "KP-601"
Displayed weight Wg x.xxx ~ xxx.xxx
Tare weight Pt x.xxx ~ xxx.xxx
Pieces Pi xxxx
Note:
• The data are divided with commas (,) for each data.
• The terminator (end of the data) is CR (ASCII code 0DH), LF (ASCII code 0AH).
• The control data for the items 1–2 are for expansion. They are not used presently so the
receiving side can ignore them.
• Because of its specifications, the scale will output an irrelevant signal when it's turned off. Make
sure you ignore this signal and do not import it.
• The weight data are shown only in grams.
[Output data]
Displayed Weight Tare Weight
W g P t
Pattern
Counting mode Weight mode
2 Bytes fixed
✓ ✓
1 Bytes fixed
✓ ✓
8 Bytes fixed
✓ ✓
5–7 bytes
✓ ✓
5–7 bytes
✓ ✓
1–5 bytes —
✓
K P 6 0 1
Pieces
P i
9