Aiwa VX-S207U Mode D'emploi page 7

CATV connections
To connect a CATV system without using a CATV converter
VX-S207
1
Connect the cable from the CATV system to the UHF/VHF connector on the unit.
2
Connect the AC cord to the AC wall outlet after passing it through the AC cord hook.
To connect a CATV system using a CATV converter
VX-S207
1
Connect the cable from the CATV system to the input connector on the CATV converter.
2
Connect the output connector on the converter to the UHF/VHF connector on the unit.
3
Connect the AC cord to the AC wall outlet after passing it through the AC cord hook.
UHF/
VHF
AC cord hook
2
UHF/
VHF
AC cord hook
3
CATV system
1
To AC outlet
CATV system
75-ohm
coaxial cable
1
(not supplied)
75-ohm coaxial cable
(not supplied)
To AC outlet
75-ohm coaxial cable
(not supplied)
CATV converter
(not supplied)
2
6
ENGLISH