Setting The Timer With Vcr Plus+® System - Aiwa VX-S207U Mode D'emploi

Playing back a tape (continued)
To stop recording
Press s STOP on the remote control or Z STOP/
EJECT on the unit.
The w REC/OTR button on the unit lights off.
To extend the recording duration while
recording
Press w REC/OTR until the new duration you want appears
on the screen.
Tip
To confirm the remaining time of recording, press CALL during
One-Touch Recording.
Notes
• If the power is turned off during One-Touch Recording, the
TV turns off, but the VCR continues to record.
• During One-Touch Recording, when the tape reaches the
end, the TIMER REC indicator on the unit flashes.
25
ENGLISH
Setting the timer with
VCR Plus+® system
You can greatly simplify timer recordings with VCR Plus+®
system. Just enter the PlusCode number, a number
assigned to each TV program, and the unit will set the timer
recording automatically. You can find PlusCode number in
most TV guide magazines.
You can set up to 8 programs.
VCR PLUS+
MENU
SET/TRACKING
+/–
Before starting
• Check that the clock is set correctly.
• Check that the channel numbers match the guide channels
which assigned to the TV stations.
• Insert a cassette with its erasure prevention tab in place.
• Set the TV VCR/CATV selector to TV VCR.
• If the CATV converter is used for the timer recording,
check that the CATV converter is turned on and the
channel you want to record is selected.
1
Press VCR PLUS+ button.
2
Enter the PlusCode number of the TV program
you want to record using the number buttons.
If you make a mistake, press CANCEL.
"PROGRAM" in this menu stands for the VCR PLUS+
button.
TV VCR/CATV
Number buttons
T-REC
ENTER
CANCEL
VX-S207
TIMER REC
indicator