Playing Back A Tape - Aiwa VX-S207U Mode D'emploi

Setting the Off-Timer (continued)
5
Press SET/TRACKING + or – to set the hours,
then press ENTER.
6
Press SET/TRACKING + or – to set the minutes,
then press ENTER.
To change the minutes setting in ten minutes, press and
hold SET/TRACKING + or –.
7
Press SET/TRACKING + or – to display SET,
then press ENTER.
8
Press MENU 3 times to return to the normal
screen.
The unit automatically turns off at the programmed time.
To correct the data while setting
Before pressing ENTER in step 7, press CANCEL
repeatedly until the item you want to correct flashes. Reset
the data using the SET/TRACKING + or – button.
Tips
• To cancel the Off-Timer, follow the steps 1 through 4. Then
press ENTER repeatedly until SET flashes and press
SET/TRACKING + or – to display CANCEL.
• To confirm the setting, follow the step 1 through 3.
Press MENU 3 times to return to the normal screen.
• Do not set the Off-Timer to the same time as the setting of
the On-Timer.
19
ENGLISH
PLAYBACK

Playing back a tape

AD-SKIP
fREW/[
sSTOP
SET/TRACKING
+/–
SLOW
DPLAY
fREW/[
1
Insert a cassette.
• The power turns on automatically.
• Playback starts immediately if the erasure prevention
tab has been removed from the cassette.
2
Press d PLAY to start playback.
"D" of the button on the unit lights.
To stop playback
Press s STOP on the remote control or Z STOP/
EJECT on the unit.
"D" of the button on the unit lights off.
Notes
• When the tape reaches the end during playback, slow
playback, fast-forward or forward search, the unit
automatically rewinds the tape to the beginning and ejects
the cassette (Auto rewind function).
• The unit selects the tape speed, SP, LP or SLP (EP).
• The power is turned on and playback is started when
d PLAY is pressed during power off.
• Without high quality resolution on the picture, it is available
to use S-VHS cassette tape on this unit. The picture may
have noise with some tapes.
zEJECT
TV MONITOR
dPLAY
gF FWD/]
aPAUSE/STILL
ATR
VX-S207
ZSTOP/EJECT
gF FWD/]