Checking The Channel Set-Up To Use - Aiwa VX-S207U Mode D'emploi

Checking the channel set-up
to use VCR Plus+® system
To set the timer using VCR Plus+® system, you have to
check whether the VCR channel numbers match the guide
channels which are assigned to the TV stations.
If they do not match, the VCR Plus+® system does not
function correctly. In this case, coordinate the number.
Number
buttons
MENU
SET/TRACKING
+/–
For example
For each channel your unit receives, use the channel line up
chart to check that the channel numbers match. For
example, SHOWTIME is listed in the channel line up chart
(under the VCR Plus+ Channel Number) as channel 38,
your unit receives SHOWTIME on channel 14, you need to
coordinate these numbers by locating guide channel 38
(under GUIDE CH). Next enter your SHOWTIME channel 14
(under VCR CH).
Continue this process until all channels match.
Sample Channel Line Up Chart
TV Station
VCR Plus+
Channel Number
WCBS New York CBS
WNBC New York NBC
WNYW New York NYW
WABC New York ABC
A&E Arts & Entertainment
BET Black Entertainment
CNBC Consumer News & Business
CSPAN Government Business
DSC Discovery Channel
DIS Disney Channel
MAX Cinemax
SHO Showtime
USA USA Network
• Channel Guide listings are available in your local TV Guide
and Newspaper.
TV VCR/CATV
ENTER
CANCEL
Local Cable Company
Channel Number
02 02
04 04
05 05
07 07
39 44
57 23
23 16
28 54
37 63
53 27
45 15
38 14
44 40
Before starting
Set the TV VCR/CATV selector to TV VCR.
1
Press MENU.
2
Press SET/TRACKING + or – to select CH SET-
UP, then press ENTER.
3
Press SET/TRACKING + or – to select GUIDE
CH SET, then press ENTER.
4
Press SET/TRACKING +, – or the number
buttons to select GUIDE CH "38," then press
ENTER.
When selecting the number between 10 and 19 using
the number buttons, press 0 once to enter the hundreds
digit, and then press the buttons 1 through 9 to enter
tens and ones digits.
When selecting the numbers less than 10 using the
number buttons, press 0 twice to enter the hundreds and
tens digits, and then press the buttons 1 through 9 to
enter the ones digit.
5
Press SET/TRACKING+, – or the number
buttons to display VCR CH "14," then press
ENTER.
When you use the number buttons, select the number in
the same way as in step 4.
6
Repeat steps 4 and 5 until all necessary
channel numbers are set.
7
Press MENU 3 times to return to the normal
screen.
Tip
To cancel the VCR CH setting, press CANCEL in step 5.
12
ENGLISH