BASIC OPERATIONS
Watching a TV program
POWER
Number
buttons
MUTING
VOLUME + /–
Headphones jack
VOLUME
+ /–
POWER
indicator
1
Press POWER to turn on the unit.
The POWER indicator on the front lights.
2
Press CHANNEL N or M repeatedly, or the
number buttons to select the channel number.
To select CATV broadcast using the number buttons
Set the TV VCR/CATV selector to CATV. When
selecting the number between 10 and 19, press 0 once
to enter the hundreds digit, and then press the buttons 1
through 9 to enter tens and ones digits. When selecting
the numbers less than 10, press 0 twice to enter the
hundreds and tens digits, and then press the buttons 1
through 9 to enter the ones digit.
To select VHF/UHF broadcast using the number buttons
When selecting the numbers less than 10, press 0 to
enter the tens digits, and then press the buttons 1
through 9 to enter the ones digit.
3
Press VOLUME + or – to adjust the volume.
13
ENGLISH
TV VCR/CATV
SLEEP
PREV.CH
CHANNEL
N/M
VX-S207
POWER
CHANNEL
N/M
To turn off the TV
Press POWER.
To mute the volume
Press MUTING. To restore the volume, press MUTING,
VOLUME + or –.
To recall a previous channel
Press PREV.CH to switch back and forth between the
current channel number and the previous one.
Tip
To listen through the headphones, insert headphones (not
supplied) with a stereo mini plug into the headphones jack on
the front. The sound from the TV speaker is muted.
Note
The power automatically turns off approximately 15 minutes
after a television station has stopped broadcasting.
Setting the sleep timer
Press SLEEP repeatedly to select the number of
minutes after which to turn off.
The minutes change in 10-minute intervals, down from 120
minutes. After the set amount of time has elapsed, the unit
turns the power off.
0
10
•••••
To check the remaining sleep time
Press SLEEP once. The remaining time appears on the
screen.
To cancel the sleep timer
Press SLEEP repeatedly until "SLEEP 0" appears.
100
110
120
SLEEP
1 2 0