Setting The Timer Manually - Aiwa VX-S207U Mode D'emploi

Setting the timer manually

If you cannot use VCR Plus+® system, you can set the
timer manually.
You can set up to 8 programs within one month of the
current date.
MENU
SET/TRACKING
+/–
Before starting
• Check that the clock is set correctly.
• Insert a cassette with its erasure prevention tab in place.
• Set the TV VCR/CATV selector to TV VCR.
• If the CATV converter is used for the timer recording,
check that the CATV converter is turned on and the
channel you want to record is selected.
1
Press MENU.
2
Press SET/TRACKING + or – to select TIMER
REC SET, then press ENTER.
3
Press SET/TRACKING + or – to select the line
on which no program has been set, then press
ENTER.
4
Press SET/TRACKING + or – to set the date,
then press ENTER.
If you want to set daily/weekly recordings, see " To set
the daily/weekly timer."
27
ENGLISH
5
6
TV VCR/CATV
7
8
T-REC
To set the daily/weekly timer
ENTER
In step 4, press SET/TRACKING – repeatedly before
CANCEL
pressing ENTER.
The setting changes as follows:
Example
The current day (Sunday)
WKL-SUN (Every Sunday)
Press SET/TRACKING + to change the display in reverse order.
After setting, press ENTER.
To cancel a program
Select TIMER REC SET in the menu. And press SET/
TRACKING + or – to select the unnecessary program, then
press CANCEL.
Caution
When the TIMER REC indicator on the unit lights, the tape
functions are not operable. To operate the others, press T-
REC. However, remember to press it again to activate timer
recordings.
Set the start time (hours and minutes), the end
time (hours and minutes), the channel number
and the tape speed in the same way as in step 4.
• To change the minutes setting in ten minutes, press
and hold SET/TRACKING + or –.
• The timer program list appears.
If you want to set another program, repeat
steps 3 through 5.
Press MENU twice to return to the normal screen.
Press T-REC.
• The TIMER REC indicator on the unit lights, and the
unit stands by for timer recording.
• If the TIMER REC indicator does not light, a cassette is
not inserted.
• The cassette is ejected if the cassette's erasure
prevention tab has been removed.
• You can turn the unit off. The unit automatically starts
recording at the programmed time.
One month later
minus two days
One month later
minus one days
Tips
• If you want to record the program through the line input,
press SET/TRACKING + or – to display "L1" (from the
AUDIO/VIDEO IN jacks on the rear) or "L2" (from the
AUDIO/VIDEO IN jacks on the front) in step 5 instead of the
channel number.
• To confirm the setting, select TIMER REC SET in the menu
to display the timer program list. Press MENU twice to return
to the normal screen.
• When the power supply is interrupted for more than 5
seconds, the preset program is cleared. In this case, you
have to set the clock and timer again.
Notes
• During the timer recording, when the tape reaches the end,
the TIMER REC indicator on the unit flashes.
• During watching the other program on the unit, when the
timer recording starts, the channel shown on the TV screen
is changed as you set on timers.
SUN-SAT (Sunday to Saturday)
MON-SAT (Monday to Saturday)
MON-FRI (Monday to Friday)
WKL-SAT (Every Saturday)
WKL-FRI (Every Friday)
.....