Festo ADN-KP Série Notice D'utilisation page 20

KP/KPE/ADN−...−KP/DNC−...−KP/DS NU−...−KP
Note
Incorrect handling can lead to malfunctioning.
S Make sure that the specifications in this chapter are always observed.
Compare the maximum values specified
S
with those of your application. The maxi
mum permitted values, e.g. for pressures,
temperatures and forces must not be ex
ceeded (è Technical specifications).
Ensure that there is a supply of correctly
S
prepared compressed air.
Please comply with national and local
S
safety laws and regulations.
Remove all transport packaging such
S
as protective wax, foils, caps, cartons
(except for plugs in the pneumatic
connections).
The individual materials can be stored in containers for recycling purposes.
Slowly pressurize the complete system.
S
There will then not be any uncontrolled
movements.
For slow start−up pressurization use
safety start−up valve type HEL.
Use the product without any unauthorized
S
modifications.
Please observe the warnings and instruc
S
tions
on the product
in the operating instructions.
20
C [%]
Fig. 6
LR−...
LF−...
Fig. 7
Fig. 8
Festo KP/KPE/ADN−...−KP/DNC−...−KP/DSNU−...−KP 0703d
[mbar]
English